Delivery specifications for printed matter
Foil printing is opaque and prints over the offset printing. You should not save the offset printing. Apply overfill where possible and necessary in offset printing.
Deliver a PDF on the foil printing status including crop marks, cross marks and / or manure drawing in 100% black. Deliver a PDF of the combined offset printing and foil printing at 100%
Prior consultation if metallic inks, special varnishes of different types of paper, etc. should be applied.
Delivery specifications Drukkerij Hensen e.g.
Always indicate pressure on the printed matter;
The digital document for a reflex or 2-phase foil stamp in consultation;
Laying the tile (see drawing) wrong setting gives closing problems.
Foil:
Do not save foil in the offset part due to closing problems;
With the exception of transparent or mother-of-pearl films these in consultation;
Small texts, images and narrow lines in consultation;
Pre-laying cylinder from edge of paper to imprint foil must be at least 40 mm.
Emboss:
Small texts, images and narrow lines in consultation;
Pre-laying cylinder from edge of paper to imprint must be at least 40 mm;
The result strongly depends on the paper type chosen, we recommend using a long-fiber material, and to consult with us in advance.
Machinery information:
|
Type machinery:
|
Minimum paper size: |
Maximum paper size: |
Application: |
|
A4 degel
|
105 x 150 mm |
250 x 350 mm |
Folie, pregen |
|
A3 degel
|
105 x 150 mm |
320 x 460 mm |
Folie, pregen |
|
Heidelberg SBG
|
180 x 300 mm |
560 x 770 mm |
Pregen |
|
Heidelberg SBD
|
320 x 460 mm |
640 x 890 mm |
Folie |
|
Starfoil Victoria
|
350 x 500 mm |
710 x 1020 mm |
Folie |
|
Starfoil 1050 HS
|
370 x 480 mm |
750 x 1050 mm |
Folie, pregen en hologrammen (max. 6 stuks per doorgang). |
|
Bobst foilmaster |
350 x 500 mm |
1020 x 720 mm |
Folie, pregen en hologrammen (max. 6 stuks per doorgang). |